| 空压机的保养 |
| 添加时间：2017/7/21 20:35:23 浏览次数： |
| 1、为了提供良好的润滑，采用符合标准的油品，禁止使用劣质机油； 1. In order to provide good lubrication, adopt standard oil products and prohibit the use of inferior engine oil; 2、对规定的监测点巡回检杏并认真填写运行记录； 2. To take a survey of the prescribed monitoring sites and fill in the running records carefully; 3、应随时注意和检查各压力表和温度表的读数是否在规定范围内； 3. Always be aware of and check whether the readings of the pressure gauge and thermometer are within the specified range; 4、保持机身油池内和注油器中的润滑油位在规定的范围； 4. Keep the lubricating oil level in the fuselage oil tank and lubricator in the specified range; 5、检查注油器注油是否正常，检查润滑油向各个注油点的给送情况，如注油不正常，则应停止空压机运行并排除； 5. Check whether the oil lubricator is normal and check the feeding conditions of lubricating oil to various oil filling points. If the oil is not normal, the air compressor should be stopped to operate and eliminate; 6、经常注意排气阀和吸气阀的工作状况是否正常并定期清洗； 6. Regular attention should be paid to the normal and regular cleaning of exhaust valve and suction valve; 7、经常注意中间冷却器，储气罐上的安全阀状态是否完好可靠； 7. Always pay attention to the intercooler, and the safety valve status on the storage tank is sound and reliable; 8、定期清洗或更换各过滤器机芯，定期更换润滑油； 8. Regularly clean or replace all filter cores and replace the lubricating oil regularly; 9、中间冷却器冷凝出的油水应每二小时排放一次，储气罐每班排放一次，如空气中的湿度较大，应增加排放次数； 9. The condensing oil water from the intermediate cooler should be discharged every two hours. Once every shift in the tank, such as the humidity in the air, the number of emissions should be increased. |
| 上一页 空压机的保养 |
| 下一页 螺杆空压机清洗保养方法大全 |
Copyright © 技术支持：遨游网络