| 螺杆空压机维护保养 |
| 添加时间：2021/10/29 15:26:11 浏览次数： |
1. Check oil level, exhaust temperature and exhaust pressure daily to check for abnormal sounds. 2.每周开机前打开分离器排污阀排放扭王块模具 高铁遮板模具 阶梯护坡模具 拱形护坡模具 卵形槽模具 保定室内设计培训 保定平面设计培训冷凝水，检查各处有无泄漏，检查安全阀，检查皮带磨损情况(目测)； 2. Open the separator drain valve to drain condensate before starting up every week, check whether there is leakage everywhere, check the safety valve, check the belt wear (visual inspection); 3.定期检查进气控制阀、最小压力阀、电控箱连接线端子、安全阀、冷却风扇； 3. Check regularly the intake control valve, minimum pressure valve, connection terminal of electronic control box, safety valve and cooling fan. 4.定期清洗、清扫冷却器，试验安全阀可靠性； 4. Clean and clean the cooler regularly to test the reliability of the safety valve. 5.定期更换机油过滤器芯、油分离器滤芯、进气过滤器滤芯和润滑油。 5. Replace oil filter core, oil separator filter core, air inlet filter core and lubricating oil regularly |
| 上一页 无油螺杆空压机的核心是出众的二级压缩主机 |
| 下一页 空压机的用途是什么？ |
Copyright © 技术支持：遨游网络