| 螺杆空压机排气温度过高的七大原因 |
| 添加时间：2017/6/2 16:34:33 浏览次数： |
| 螺杆空压机排气温度过高的七大原因： Seven reasons why the exhaust temperature of the screw air compressor is too high: 1、检查排气压力是否超过规定，如超过，应调整到规定的排气压力； To check if the exhaust pressure exceeds the regulation, if more than, should adjust to the exhaust pressure of the regulation; 2、检查润滑油是否清洁及油位是否正常，必要时应补足或更换润滑油； Check whether the lubricating oil is clean and the oil is normal and should be replenished or replaced when necessary. 3、检查风扇电机转速是否正常、排气口是否堵塞； Check whether the motor speed is normal and the vent is blocked. 4、检查油冷却器、后冷却器外表是否清洁，必要时清洁冷却器外表面； Check the oil cooler, and the aftercooler appearance is clean and clean the surface of the cooler when necessary. 5、检查环境对机组进风及排风有无影响，如有，应排除外来因素影响，保证机组通风正常； Checking the environment to affect the wind and exhaust air of the unit, if any, the influence of foreign factors should be excluded, and the air unit should be ventilated properly. 6、检查温控阀是否损坏； Check whether the temperature control valve is damaged; 7、检查电磁阀电磁线圈和电磁阀膜片是否损坏，必要时进行修理或更换； Check whether the electromagnetic and electromagnetic valve diaphragm is damaged and repaired or replaced when necessary. 8、检查油气分离器滤芯是否堵塞或阻力过大，如有，更换油过滤器滤芯 Check if the filter core of the oil and gas separator is blocked or the resistance is too large, if there is, the oil filter cartridge is changed |
| 上一页 空压机工作原理简述 |
| 下一页 螺杆压缩机的吸气原理 |
Copyright © 技术支持：遨游网络